Shop By Department
Search
Allows up to 8 HDMI sources to be distributed simultaneously to up to 8 displays
1.Introduction
The 8x8 HDMI Matrix with EDID control connects eight HDMI sources to eight displays. This matrix provide eight HDMI outputs and each HDMI output is supporting 1080p Full HD up to 4K plus all 3D formats and supporting independent EDID control. It works with Blu-Ray players, Set-Top boxes, Home Theater PCs, and game consoles that connect to an HDMI display. Any source is accessible at all times by any display by selecting it via the supplied IR Remote Control, RS-232, TCP/IP or by using the selection buttons on the front panel.
2.Features
l HDMI V1.4 supports: 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
l Deep Color support 48/36/30/24-bit
l Supports LPCM 7.1CH, Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio transmission
l Allows any source to be displayed on multiple displays at the same time
l Allows any HDMI display to view any HDMI source at any time
l 8-input ports support independent EDID
l Supports RS-232, remote control, on-panel control and TCP/IP Control
l Front-panel LCD display for status feedback
3.Package Contents
4. PANEL FUNCTIONS
4.1 Front Panel
1.LCD display:Show the status of input-output selection, EDID info and so on.
2.IR receiver window:Receive the IR from the remote control of 8x8.
3.POWER:Press this button to power the device on/off. The LED will illuminate green when the power is on, red when it is in 'Standby' mode.
4.LOCK:Press this button to lock all the buttons on the panel, press again to unlock. The red LED will illuminate when the button is locked, on the contrary, turn dark when unlock.
5.HDMI output selection button area:
6.HDMI input selection button area:
7.PTP button:Press to mirror all inputs and outputs (e.g. output 1 to input1, output 2 to input2 and so on).
8.EDID control area:
4.2 Rear Panel
1.PC CONTROL:Show the status of input-output selection, EDID info and so on.
TCP/IP: This port is the link for TCP/IP controls, connect to an active Ethernet link with an RJ45 terminated cable.
RS232: Connect to a PC or control system with D-Sub 9-pin cable for the transmission of RS-232 commands.
2.HDMI INPUT Area:Connect HDMI sources. LED 1-8 illuminate when the HDMI signal plug in corresponding input port with HDMI cable.
3.HDMI OUTPUT Area:Output for displays, AVR etc. LED A-H illuminate when the displays plug in corresponding output port with HDMI cable.
4.Power port:Use included DC adaptor to power the matrix switcher.
5.Remote Control
Power on /Standby:Press this button for power on the matrix or set it to standby mode.
How to operate the Matrix Remote?
1. Power on and standby
Q. How to power on and standby?
A. Press Power on /Standbybutton and wait a while.
2. How to select Output and Input Port?
Q. OUTPUT-X select INPUT-Y:
A. Press OUTPUT-X (X means 1 to 8 of outputs, including ALL)
Press INPUT-Y (Y means 1 to 8 of inputs)
Manufacturer | PlayVision |
---|---|
Power Supply | N/A |
Weight | 0.000000 |
Color | Black |
Log In
Create New Account