HDMI Digital Audio Decode

FEATURES:

• 1X HDMI input and 1X HDMI output
• 1X VGA analog video sync output, 1X SPDIF optical digital audio and 6 channel RCA analog audio output that can connect with the amplifier or the TV directly.
• MHL/HDMI working in dual mode, support audio and video input in MHL mode, and can charge for MHL equipment
• Support HDMI input up to 1080P/60Hz, supports 3D (24/30fs)
• Support CEC and HDCP
• Supports 3 modes of EDID management for audio formats, can switch among built-in EDID (2CH/5.1CH) and external EDID (TV).
• Uses 24 bit/96KHz audio DSP and 24bit /192KHz DAC
• Support digital audio formats: Dolby digital (AC3), DTS, LPCM, automatic identification signal format
• VGA output resolution format with the input format automatically changes
• Headphone amplifier output, can drive the general 3.5mm earphone
• High tone quality, low noise
• DC5V/1A power adapter

FEATURES OF THE INTERFACE

SWITCH: Audio EDID mode switch. This switch allows users to select the source's audio EDID.
PASS：HDMI pass mode. Switch to PASS mode for the HDMI source to output audio per the EDID of connected TV or AV receiver, supports up to LPCM 7.1 channels.
2CH：2CH LPCM mode. Switch to 2CH mode for the HDMI source to output LPCM 2 channels audio per the built-in EDID. Then HDMI, SPDIF, RCA and headphones output stereo audio.
5.1CH：5.1CH bitstream Mode. Switch to B5.1CH mode for the HDMI source to output bitstream audio per the built-in EDID. Then HDMI, SPDIF and RCA output 5.1CH audio, headphone output from FL and FR channel.

OPERATIONG AND CONNECTION:

1. Connect one HDMI cable from a DVD/Blu-ray player into input port of decoder.
2. Connect one HDMI/VGA cable from TV/Monitor into output port of decoder.
3. If you need a digital audio, connect one optical fiber from digital power amplifier into the SPDIF output port of decoder.
4. If you need an analog audio, Connect six AV cables from analog power amplifier into the analog audio output ports of decoder, the channel must correspond. If the connected TV or stereo power amplifier, connect the FL/FR two channel only, and switch EDID mode in 2CH.
5. If you need to use the headphone output, pls switch EDID mode in 2CH.
6. Connect 5V power supply to the decoder and inserted into the power socket.
7. VGA output resolution format with the input format automatically changes. Support resolution formats as follows: 720×480@60Hz(480P）,800×600@60Hz, 1024×768@60Hz, 1152×864@60Hz,1280×720@60Hz(720P), 1280×768@60Hz, 1280×800@60Hz, 1280×960@60Hz, 1280×1024@60Hz, 1360×768@60Hz, 1366×768@60Hz, 1440×900@60Hz, 1600×900@60Hz, 1600×1200@60Hz,1680×1050@60Hz, 1920×1080@60Hz(1080P).

SPECIFICATIONS

PACKAGE CONTENTS:

1. Main unit x 1pcs 
2. AC power adapter x 1pcs 
3. User 1pcs Manual